Username:   Password:   
   
   saab Forum
Index  FAQ  Search  Memberlist  Usergroups  Profile  Register
 Log in to check your private messages
1989 saab 900 cv shaft removal
  Post new topic   Reply to topic x-saab-x.com Forum Index » General saab Forum     
Message
Pulse     Reply with quote
How do you remove the cv shaft from the passenger side of a 1989 saab 900 ,i can not seem to get it out of the transmission
Cool     Reply with quote
Remove the clamp holding the boot on the inner CV

Other hints: Put a 3/4 to 1 inch metal spacer between the upper control arm & the chassis. This will get rid of the pressure caused by spring tension & the Shock absorber holding it up. You then need to only remove the 2 lower bolts at the control arm & remove axle nut & carefully pull the knuckle away outward & remove the axle tip out of the knuckle & then put the axle out. Check the inner CV joint as there r plenty of problems with them. To remove that u need to remove the 6 bolts at the housing that the inner cv is located. Be extremely careful not to disturb or lose the shims behind it.
Display posts from previous:   
  Post new topic   Reply to topic x-saab-x.com Forum Index » Generalsaab Forum     

Lates Messages

asian grocery

You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum